Home About Us Careers Clients Contact us Request a quote
Air Monitoring — Family 06

Ambient Air
Quality Stations.

Real-time outdoor pollutant monitoring at the fence line and in the surrounding community, collecting atmospheric data around the clock without an operator present.

Arka ambient air quality
PrincipleElectrochemistry & optical
Response time< 30 s
Accuracy±2 % FS
Operating range−20 to 70 °C
How it samples

Diffusion sampling,
calibrated on site.

The station uses diffusion gas detection, where air in the monitored area flows freely into the sensor rather than being drawn through a pump that needs servicing. Advanced four-electrode electrochemistry and optical technology carry the measurement.

Because sensor compatibility and calibration complexity are what usually sink these installations, the station is built for site-specific calibration and minimal maintenance from the start.

24-hour continuous data collection
Four-electrode electrochemistry
Fast response and high reliability
Low maintenance, extended lifespan
Energy-efficient power supply
Site-specific calibration capability
Arka ambient air quality monitoring station
Measured parameters

Gaseous, particulate
and meteorological.

Detection ranges and resolution
ParameterRangeResolution
NO₂0 – 20 ppm0.001 ppm
SO₂0 – 20 ppm0.001 ppm
CO0 – 100 ppm0.001 ppm
O₃0 – 5 ppm0.001 ppm
VOCs0 – 20 ppm0.001 ppm
PM1 / PM2.5 / PM10 / TSP0 – 20 mg/m³0.01 µg/m³

Carbon dioxide, temperature, humidity, wind speed, wind direction and atmospheric pressure are logged alongside the parameters above.

Station specifications

Electrical and
environmental.

Ambient air quality station
Work voltageDC 5 V ±1 % or DC 24 V ±1 %
Work current≤ 50 mA
Response time< 30 s
Detection principleElectrochemistry
Sampling accuracy±2 % FS
Work humidity10 – 95 % RH, non-condensing
Work temperature−20 °C to 70 °C
Storage temperature−40 °C to 70 °C
Work pressure86 – 106 kPa
Warranty1 year
Service life2 years

Monitoring at the fence line?

Tell us the parameters and how many locations. We will specify the stations and how the data reaches your reports.