Home About Us Careers Clients Contact us Request a quote
Air Monitoring — Family 05

Online SPM.
Dust, continuously.

Continuous monitoring of particulate matter emission. It pairs with a CEMS, runs standalone, or joins several dust monitors into one monitoring network across a site.

Arka Online SPM
Measure | Monitor | Protect
05 / 07
Online SPM

Laser dust monitoring for stacks and ducts, around the clock.

  • Particulate Matter
  • Laser Backscatter
  • 0–500 mg/m³
  • Networked Monitors
Accurate measurement · Process control · Reliable operationsMade in India
PrincipleLaser backscattering
Range0–500 mg/m³
Stack size0.5 – 15 m
Power< 3 W
Why backscatter

No optical path
to keep aligned.

A cross-stack instrument needs both sides aligned and stays aligned only as long as the stack does not move. This one uses laser backscattering from a single end, so mechanical vibration and temperature variation do not walk the beam off target.

Modulating the laser beam raises its resistance to interference, which matters on a stack where the background is anything but clean.

Laser backscattering principle
Single-end installation
No optical path alignment required
Resists vibration and temperature drift
Beam modulation for interference rejection
Around 3 W device power consumption
Arka online SPM particulate monitor
Specifications

The numbers
your consultant wants.

Online SPM — specifications
Detection principleLaser backscattering method
Concentration range0 – 500 mg/m³ standard, 0 – 10 g/m³ customisable
Measurable stack size0.5 – 15 m
Sensitivity1 mg/m³
Indication error≤ ±20 %
Indication repeatability10 %
Laser specification650 nm, 7 mW
Dimensions158 × 158 × 273 mm
Weight3 kg
Power consumption< 3 W
Power supplyDC 24 V ±10 %
Signal output1 × 4–20 mA, 500 Ω max load
CommunicationRS485 optional
Operating temperature−20 °C to +45 °C
Humidity range0 – 100 % RH, non-condensing
InterfaceIR remote control and LCD display
Applications

Where dust is
the regulated parameter.

Power plants

Stack particulate on coal and biomass fired boilers, reported continuously.

Steel works

Dust monitoring across sinter, furnace and handling operations.

Cement plants

Kiln and mill emissions, where particulate is the headline consent condition.

Dust removal control

Process control of bag filters and precipitators, using the reading as feedback.

Particle engineering

Process work where the particulate load is the variable being managed.

Monitoring networks

Several dust monitors combined into one site-wide network.

What is your stack diameter?

Send the stack size, the expected loading and the consent limit. We will confirm the range and quote the installation.