Continuous Emission
Monitoring. CEMS.
A sensor-based system for the regulated stack. Sixteen gases, high sensitivity and resolution, CPCB and cloud connectivity, built from analysers, probes and critical components we can service.

Continuous emission monitoring for regulated stacks, reporting to CPCB.
- Stack Monitoring
- 16 Gas Parameters
- CPCB Cloud Link
- TUV-SUD / CE
Built to satisfy
the board.
Emission monitoring is only useful if the regulator accepts the record. This system is designed around that, with CPCB connectivity, certified components and a wide selection of gas analysers, probes and critical parts.
Concentrations are reported in %LEL, PPM, %VOL and mg/m³, so the units match the consent condition rather than forcing a conversion.
Sixteen parameters
on one stack.
The analyser set is chosen against your consent conditions, so you pay for the gases you actually have to report.
How it goes
on the stack.
| Measurement basis | Sensor based system across the parameter set |
|---|---|
| Reported units | %LEL, PPM, %VOL and mg/m³ |
| Standard outputs | UART and analog voltage |
| Connectivity | CPCB and cloud upload |
| Certification | TUV-SUD and CE certified equipment |
| Components | Gas analysers, probes and critical spares held as a set |
| Integration | System integration with existing plant instrumentation |
| Maintenance | Low maintenance design, with re-calibration on a scheduled cycle |
Send us your consent conditions.
The gases, the limits and the reporting format. We will size the CEMS around what you actually have to prove.
