Home About Us Careers Clients Contact us Request a quote
HomeWater Testing InstrumentsSingle Parameter Analyzers
Water Testing — Family 01

Single Parameter
Analyzers.

One parameter, one controller, one job done properly. Where a plant needs a single number under control, a dedicated analyser beats a channel borrowed from a multi-parameter panel.

Arka Single Parameter Analyzers
Measure | Monitor | Protect
01 / 05
Single Parameter Analyzers

One measurement, one controller, built for the plant floor.

  • pH / ORP
  • Conductivity / TDS
  • Dissolved Oxygen
  • Turbidity
Accurate measurement · Process control · Reliable operationsMade in India
Parameters7 available
OutputRelay · 4–20 mA
DutyDosing & compliance
OriginDesigned & built in India
The parameters

Seven analysers,
seven questions.

Each one answers a specific question about the water. Pick the ones your consent condition or your process actually depends on.

pH

pH

Industrial pH electrodes and controllers for dosing control and effluent compliance, the parameter most plants regulate first.

0 – 14 pHDosing relayInline
Enquire
Conductivity

Conductivity

Conductivity and TDS measurement for process water, RO plant performance and boiler feed quality.

TDSµs/cmRO & boiler
Enquire
Dissolved Oxygen

Dissolved Oxygen

DO meters for aeration tanks and biological treatment, where the oxygen level drives both treatment quality and the power bill.

AerationBiologicalInline
Enquire
COD & BOD

COD & BOD

Chemical and biological oxygen demand measurement, quantifying the organic load arriving at or leaving a treatment plant.

Organic loadEffluentTreatment
Enquire
Turbidity

Turbidity

Turbidity measurement for filtration performance and clarifier outlet quality, in NTU ranges matched to the duty.

NTUFiltrationClarifier
Enquire
Residual Chlorine

Residual Chlorine

Residual chlorine analysis for drinking water and disinfection control, where too little and too much are both failures.

DisinfectionDrinking waterppm
Enquire
pH and TDS Analyzer

pH and TDS Analyzer

A combined pH and TDS instrument for plants that want both headline numbers without going to a full multi-parameter panel.

pH + TDSCombinedPanel
Enquire
Why single parameter

Fewer channels,
fewer compromises.

Sized for the duty

The range and electrode are chosen for one parameter rather than as a compromise across several.

Lower entry cost

You pay for the measurement you need, not for seven channels where one is in use.

Simpler to maintain

One electrode to calibrate and replace, on its own schedule, without taking a panel offline.

Direct dosing control

Relay outputs drive the dosing pump straight from the analyser, with no controller in between.

Scales later

Start with one parameter and add analysers, or move to a multi-parameter panel when the count justifies it.

Logs like the rest

The same outputs reach the IoT DataLogger, so a single parameter still gets cloud history.

More from the range
Arka Instruments
Arka Instruments
Arka Instruments
Arka Instruments
Arka Instruments

Which parameter is failing?

Tell us what you are trying to hold, the range and the line size. We will specify the analyser and the electrode.