Digital Temperature Controllers / Indicators
The core instrument. Reads the sensor, displays the value and drives the control output that holds the setpoint.
EnquireDigital controllers and indicators for process temperature, including combined temperature and RPM units and flameproof process indicators for classified areas.

The differences are what else the instrument does alongside temperature, and whether the body has to be certified for the area.
The core instrument. Reads the sensor, displays the value and drives the control output that holds the setpoint.
Enquire
Temperature and rotational speed on one instrument, for drives and rotating equipment where both matter together.
Enquire
Flameproof process indicators for hazardous areas, where the enclosure carries the certification alongside the measurement.
Enquire
Speed measurement and control on its own, for applications where the rotational rate is the controlled variable.
EnquireResistance thermometers for the accuracy and stability that process control needs.
Thermocouples where the range runs higher than an RTD will comfortably reach.
Control output driving a contactor, valve or drive to hold the process at target.
High and low alarm contacts for interlocks and annunciation.
4–20 mA out to a DCS, recorder or the IoT DataLogger.
FLP process indicators certified for the zone, not just rated by the electronics.


Send the range, the sensor type and the area classification. We will specify the controller and the probe together.