Introduction:
A Turbidity controller is a device designed to be permanently installed as either a stand alone instrument, or as part of a control panel – to offer continuous turbidity measurements from a Turbidity Sensor is a micro-processor based instrument which allows the turbidity sensor to be calibrated directly from the controller, as well as the range to be adjusted as required.
This probes are designed for measuring low turbidity values according to nephelometric method. This probe is for overflow and in-line installation.
Features:
- Panel mounting turbidity controller
- Precision turbidity controller for drinking water quality analysis, water treatment, effluent treatment, aquaculture, and environmental applications in both process and effluent monitoring and control.
- Using the setup program: user-friendly programming
- 4-20mA analog output
- RS485 communication
Specifications:
| Product | Turbidity Controller |
| Measure range | 0 to 4.0 (or)0 to 40.0 (or) to 400.0 NTU |
| Resolution | 0.1 NTU |
| Accuracy | 0.2% of the full-scale selected |
| Temperature Limit | 0 to 50°C |
| Cable Length | 5m,PVC sheath |
| Body | PVC C |
| Protection | IP 68 |
| Communication | R5485, Modbus RTU |
| Signal output (Optional) | 4-20mA, maximum loop 7500, 0.01%FS |
| Power supply | AC220V±10%,50HZ |
| Relay output | 250V,3A |
