Call: +91-8143812346
Ultrasonic Level Indicators

Category: Ultrasonic Level Meter

Applications: Ultrasonic level meter is microprocessor controlled digital level meter. Ultrasonic pulses generated by the sensor (transducer) emitted in the measurement, the surface acoustic wave after reflection by the liquid receiving same sensor or an ultrasonic receiver, by a piezoelectric crystal or a magnetostrictive device into an electrical signal by transmitting and receiving sound waves to calculate the time between the sensor surface to the distance measured liquid. As a result of non-contact measurement, measured media is almost unlimited, can be used to measure the height of a variety of liquid and solid materials.

Get Quote Now

Specification : 

 Product  Ultrasonic level meter
 Measure range  5m, 10m, 15m, 20m, 30m, 40m, 50m
 Blind zone  <0.3 – 2.5m(different for range)
 Accuracy  0.5%
 Display  LCD
 Frequency  20~350 kHz
 Output (optional)  Four-wire 4~20mA/510Ωload
 Two-wire 4~20mA/250Ω load
 2 relays (AC 250V/ 8A or DC 30V/ 5A  )
 Temperature  LCD: -20~+60℃; Probe: -20~+80℃
 Power supply  24VDC (Optional: 220V AC+15%  50Hz)
 Power consumption  <1.5W
 Protection degree  IP65

Introduction : 

Ultrasonic level meter is microprocessor controlled digital level meter. Ultrasonic pulses generated by the sensor (transducer) emitted in the measurement, the surface acoustic wave after reflection by the liquid receiving same sensor or an ultrasonic receiver, by a piezoelectric crystal or a magnetostrictive device into an electrical signal by transmitting and receiving sound waves to calculate the time between the sensor surface to the distance measured liquid. As a result of non-contact measurement, measured media is almost unlimited, can be used to measure the height of a variety of liquid and solid materials.

 

Application : 

– River Measurement
– Tank Measurement
– Cisterns
– Water Tank / Water Tower

Advantages : 

– Non-contact, maintenance-free measurement
– Measurement unaffected by media properties, like dc value or density
– Calibration without filling or discharging

 

Instrument Selection : 
 Product  Ultrasonic level meter
 Measure range  5m, 10m, 15m, 20m, 30m, 40m, 50m
 Blind zone  <0.3-2.5m(different for range)
 Accuracy  0.5%
 Display  LCD
 Frequency  20~350 kHz
 Output (optional)  Four-wire 4~20mA/510Ωload
 Two-wire 4~20mA/250Ω load
 2 relays (AC 250V/ 8A or DC 30V/ 5A  )
 Temperature  LCD: -20~+60℃; Probe: -20~+80℃
 Power supply  24V DC (Optional: 220V AC+15%  50Hz)
 Power consumption  <1.5W
 Protection degree  IP65